Mounting The Accessories - Honeywell SC105 Installation & User Manual

6. Attach the detector base on the

Mounting the Accessories

A full range of mounting accessories for different applications facilitates a wide range of mounting
requirements.
The Movable Mounting Kit SC111
The Movable Mounting Kit SC111 consists of one mounting plate on which Detector SC105 is
mounted, one Day position plate on which Detector SC105 is positioned during non armed time,
and one Night position plate mounted on the protected surface, on which Detector SC105 is
positioned during armed time.
The figure below shows the components of the Movable Mounting Kit SC111. For more
information, please refer to
Figure 6-4 Movable Mounting Kit SC111 Components
Night Position Plate
The Keyhole Protection Kit SC112
The Keyhole Protection Kit SC112 is used with Detector SC105 to prevent unlocking during
armed installation or loading explosives into the keyhole, as it at the same time is a mounting
plate for the Detector SC105 to detect intrusion attempts on doors.
The figure below shows the components of the Keyhole Protection Kit SC112. For more
information, please refer to
Figure 6-5 Keyhole Protection Kit SC112 Components
Cover Plate
The Spacer for Keyhole Protection Kit SC118
The Spacer SC118 is used for Keyhole Protection Kit SC112 only if the steel slide on SC112
touches the keyhole collar on the protected surface. For more information, please refer to
"Keyhole Protection Kit SC112 User
Figure 6-6 Spacer for Keyhole Protection Kit SC118 Components
Mounting Plate SC110 and then use the
two M4×8mm screws provided to fix it.
"Movable Mounting Kit SC111 User
Day Position Plate
"Keyhole Protection Kit SC112 User
Base Plate
7. Wire and configure the detector (see the
related chapter in this user guide), and after
a successful test use the top screw to fix the
detector cover properly.
Mounting Plate
Guide".
Honeywell
Guide".
Guide".
- 11 -