Setup - KERUI ENKLOV W1 Instruction Manual

Strobe Siren Setup
Bind
Please add to siren under "DisArm" status and don't trigger any detectors during pairing.
1,Press SET button on siren and hold for 3s,beep once ,LED light in siren will be on
and enter into pairing mode.
2,Then press (Arm) button on main panel,siren beep twice and pairing successfully.
Delete: Unplug the siren, press &hold"Set" button and plug siren into socket, beep six
times. Then siren have been delete from system.
Strobe Siren Volume Adjustment
8 levels of adjustable volume from loud to quiet and then from quiet to loud in cycle.
Default volume is loud.
Press "SET" button on siren, the volume change from loud to quiet and then from
quiet to loud in cycle. Led light flash once or twice indicates Mute; Led light flash
once or twice and beep 1 or 2 times indicates loudest volume.
28