Avery Dennison ALS 230 User Manual page 55

Operators Manual
ALS 230
Command
#!MDIRnnnn
#!MLABnnnn
#!PDT nnnn
#!PHT nnnn
#!POS_nnn
#!PRDLnnnn
#!P_S_nnnn
#!RAMPnnnn
#!SLEWnnnn
#!STADnnnn
#!STODnnnn
#!VELOnnnn
#!SAVEnnnn
#!LOADnnnn
The following described commands do not have parameter values. With these commands the
host can monitor and control the machine.
#!CLRC Set label counter to 0
#!CLRE Clear error message
#!CLRW Clear warning
#!ERRF The machine sends an error status to the monitoring computer. The message
ERR8___4__1_<04H> means, error 8, 4 and 1 have occurred.
#!WARF The machine sends a warning status to the monitoring computer. The message
WARF7______0 means: The warnings 7 and 0 have occurred.
#!LABC The machine sends the number of dispensed labels e.g. LABC0000008359 back
#!SP__ The machine is set to off. The product sensor is disabled and labelling will
therefore be stopped.
Release 11/05
Description
Motor direction
Missing label error
Print dwell time
Printer hold time
Labelling position
Product length
Polarity product sensor
Acceleration Ramp
Slew speed
Start delay
Stop position
Speed
Store in data bank
Load data bank
Page 53
Range
0000 Right --- >
0001 Left < ---
0000 NONE
0001 Warning
0002 Error 1
0003 Error 2
0001 – 1000 ms
0000 printer off
0001 – 7500 ms
0001 – 9999 * 0.1 mm
0005 – 4000 mm
0000 LEDG
0001 TEDG
0000 NORM
0001 FAST
0000 = FAST
0001 = SLOW
0001 - 9999 ms
0080 - 9999 * 0.1 mm
0020 - 0300 * 0.1m/min
0001 - 0009
0001 - 0009
Serial interface