Motorola PTP 600 System User Manual page 72

Series point-to-point wireless bridges
Hide thumbs Also See for PTP 600:
Table of Contents

Advertisement

The length of the safety lanyard must not exceed 1m (approx 3 ft) in length. The lanyard
should be made from a material that does not degrade in an outdoor environment.
The safety lanyard must be fixed to a separate fixing point that is not part of the direct
mounting system for the ODU.
7.7
Connecting Up
7.7.1
Preparing The PIDU Plus To ODU Cable
NOTE: The maximum cable length between the ODU and the user's Network Equipment is
100m (330 ft). Cable lengths up to 300m (984 ft) can be used where the PIDU Plus to ODU
cable is supplying power only, i.e., when using the PTP 600 Series Bridge Optical Interface.
The cable should be assembled to the following instructions:
Step 1: Assemble gland on cable as shown
Step 3: Arrange conductors as shown in
F igure 19 and cut to length
1 0 3 3 H
Step 2: Strip the outer insulation
Step 4: Insert conductors and crimp
70

Advertisement

Table of Contents
loading

Table of Contents