Motorola PTP 600 System User Manual page 208

Series point-to-point wireless bridges
Hide thumbs Also See for PTP 600:
Table of Contents

Advertisement

14.2 TDD Synchronization Installation and Wiring Guidelines
As mentioned in Section
process:
1. Install GPS Synchronization unit
2. Use web interface to enable and configure parameters
14.2.1 Installing the Recommended GPS Synchronization Kit
The recommended GPS Sync installation kit includes the following:
GPS Sync Box unit from MemoryLink (see
terminated Ethernet and Sync cables and cable glands (2) which connect directly
to a PTP 600 Series ODU, and an attached un-terminated Ethernet cable.
Mounting bracket and mounting bracket screws
Outdoor rated UV resistant cable tie
GPS Sync Box User Manual.
In addition to the hardware mentioned above, it is recommended to have an appropriate
lightning protection (ALPU-ORT in Section
26
TDD Synchronization assumes that the user is familiar with network planning issues. For simple
networks, it is advisable not to use the "Expert Mode" and rely on the configuration wizard.
5 .2.4, enabling the TDD Synchronization
1 2 1 4 H
1 6).
1 2 1 6 H
206
26
feature is a two-stage
2 5 F
F igure 127), with two attached
1 2 1 5 H

Advertisement

Table of Contents
loading

Table of Contents