Motorola PTP 600 System User Manual page 106

WARNING: The configuration file is currently restricted to a single software version and can
only be restored into a wireless unit operating the software version indicated in the
configuration file header.
The configuration file can also be used when swapping out a faulty wireless unit. If one of the
wireless units is replaced on a wireless link a configuration file captured from the faulty unit
can be replaced into the new unit to speed up replacement. It should be noted that when
placing a configuration file into a wireless unit with a different MAC Address the license key
will not be restored and may need to be entered. This can be obtained either from the Quick
Install guide supplied with replacement wireless unit or directly from Motorola. Note that the
target MAC address at the other hand needs to change.
The restoration of configuration files can be performed using the Restore configuration tool.
Using the browser button to locate the configuration file you wish to restore then click the
'Restore Configuration File and Reboot' button (
confirm the action ( F igure 50)
1 0 7 8 H
Figure 49 - Restore Configuration File Pop Up Screen
F igure 49 ) . The user will then be prompted to
1 0 7 6 H 1 0 7 7 H
104