Motorola PTP 600 System User Manual page 102

8.3.1.3 LAN Configuration Page – Use VLAN For Management Interfaces
The layout of the LAN Configuration page changes if this attribute is enabled in order to allow
the VLAN VID and VLAN Priority to be set, see
after the unit is rebooted.
Warning: You must ensure that you can access the VLAN which you configure here,
otherwise you will be unable to access the unit following the next reboot.
Warning The PTP 600 is only compatible with single VLAN tagged packets. Any packet
with two or more packets will be ignored.
F igure 44
1 0 7 0 H
Figure 44 - VLAN Configuration Fields
100
. The VLAN settings are applied only
1 0 7 1 H