Terraillon Tensio Instruction Manual page 79

T
able 6 – Recommended separation distances between portable and mobile RF communications equipment
and the ME EQUIPMENT or ME SYSTEM – for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between portable and mobile RF communications equipment
The device is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the device can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment
o
(transmitters) and the device as recommended below, according to the maximum output power of the
on
IMMUNITY test
Rated maximum
output power of
transmitter
W
0,01
0,1
1
10
in
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
in metres (m) can be estimated using the equation applicable to the frequency of the transmitter,
where
manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
,
ed.
Model : TMB-988
e
IEC 60601- test level
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
0,01
0,1
1
10
100
is the maximum output power rating of the transmitter in watts (W) according to the transmitter
absorption
and reflection from structures, objects and people.
and the device
communications equipment.
Compliance level
m
80 MHz to 800 MHz
0,01
0,1
1
10
100
Electromagnetic
environment – guidance
800 MHz to 2,5 GHz
0,01
0,1
1
10
100
79