– A low value decreases the depth at which the
filter is applied.
– A high value increases the depth at which the
filter is applied.
Sonar
0%
100%
The new values will persist over a power cycle.
Adjusting the Noise Filter
From the application menu:
1. Select Sonar Sensitivity or DownVision
Sensitivity .
2. Select Noise Filter.
3. Use the Up and Down Directional controls to
adjust the Noise Filter to the required value, or
4. Press the OK button to switch between Auto and
Manual.
68
8.12 DV System settings menu options
The System Settings menu on the DV variant
display is located in the main application menu.
Refer to
DownVision
available options for your display variant.
11.1 System Settings menu
Dragonfly–4 / Dragonfly–5 / Dragonfly–7 / Wi–Fish
for details on