Fishfinder Applications' Features - Raymarine Dragonfly-4 DV Installation And Operation Instructions Manual

8.3 Fishfinder applications' features

Using waypoints to mark
fishing spots or target
locations (Pro only)
Determining target depths.
Adjusting the speed of the
scrolling image.
Setting alarms (fish, depth or
water temperature).
Using Zoom.
* Using A-Scope mode.
Changing the on-screen
depth range.
Adjusting Sensitivity Settings
to help optimize and simplify
the displayed image.
Note: * Not available in DownVision application.
62
• Placing a waypoint
• Enabling / Disabling
Target Depth ID
• Enabling / Disabling Depth
Lines
• 8.7 Scrolling
• 11.2 Alarms
• 8.5 Zoom
• 8.8 A-Scope mode
• 8.6 Range
• 8.11 Sensitivity
adjustments
8.4 Fishfinder applications' controls
The Sonar applications consists of 2 modes:
Scrolling mode and Cursor / Pause mode. The
behavior of some controls are dependent upon mode
and product variant.
Scrolling mode
Sonar application
Scrolling mode is the default mode. In Scrolling
mode an image is displayed which scrolls from right
to left across the screen.
In Scrolling mode the controls behave as follows:
• from the default view, pressing the + button
enables Zoom mode.
– when in Zoom mode use + and – buttons to
increase or decrease the zoom level.
• pressing the OK button opens the application
menu.
• pressing the Back button opens the View
switcher (not applicable to DV variants).
• using any of the Directional controls will switch
to Cursor / Pause mode.
Cursor / Pause mode
Important: The DV and DVS variants do not
display a cursor in Cursor / Pause mode.
Sonar application
In Cursor / Pause mode the scrolling image is
paused and depending on product variant, the cursor
can be moved around the screen.
In Cursor / Pause mode the controls behave as
follows:
• from the default view, pressing the + button
enables Zoom mode.
– when in Zoom mode use + and – buttons to
increase or decrease the zoom factor.
• using any of the Directional controls will move
the cursor in that direction (not applicable to DV
and DVS variants).
• pressing the Ok button opens the context menu.
• pressing the Back button returns the application
to Scrolling mode.
Menus and dialogs
With a menu or dialog open the controls behave as
follows:
Dragonfly–4 / Dragonfly–5 / Dragonfly–7 / Wi–Fish
DownVision ™ application
DownVision ™ application