S3 Graphics CHROME 400 Series User Manual page 63

Dragging Devices
Drag action
treat the device as inactive.
Check the device's Display Status checkbox to change the
device's status to ON. Clear the checkbox to change the
device's status to OFF.
You must select Apply All to finalize the Status change.
At a minimum at least one device must be on. S3 Graphics
software will disallow device combinations that are not
compatible with your hardware.
Display device status cannot be adjusted while in Windows
Vista/XP Extended desktop mode. (Note: Extended mode
can be toggled from either Options dropdown list, select
Display Settings, or from the Personalization Display
Settings page. Select the secondary display and uncleck
Extend desktop to this display. Once in Multiple Monitor
Clone mode (SingleView same image), you should now be
able to fully configure your displays independently.)
Display device status cannot be adjusted while playing
DVD or higher resolution video.
Display Device icons can be selected and dragged to a
new position.
Click on an icon and hold the mouse button down while
dragging the image icon to the left or right in the Display
Device area. While the drag operation is in progress you
may see a faint monitor image and a black vertical line
indicating the current target destination for the icon.
Note that this adjustment is for convenience only and is not
considered a "change" by the application. You do not have
to Apply, the application will automatically remember the
icon positions. Moving icons has no affect on the relative
position of the displays in screen space.
User Guide for Chrome 400/500 Series Graphics
SG195-B.1 1/6/2009
63
Page