Table of Contents
Advertisement
5.3.2 Enabling a Multiple Monitor Clone Display
To extend the desktop onto a second monitor, use the operating system Display
Settings page
Extend the desktop
To enable a Multiple Monitor Clone desktop, where the secondary display shows
an image duplicate of the primary screen, you must use S3 ScreenToys. This
configuration is required for
To enable a Multiple Monitor Clone desktop,
Step 1.
Right click on the desktop. Select S3
Screen Toys.
Step 2.
From the left panel menu, select
Device Management
Step 3.
In the Display Devices: area click on
the checkbox below the display
device you want to become the Child or Clone copy of the current
desktop. In the example below the second CRT2 device is going
to be added as a Clone child of the primary CRT display device.
Step 4.
Click the Apply All button at the bottom of the
window.
Step 5.
Two messages to confirm your change will appear. Click OK and
Yes to confirm.
Step 6.
After the clone display is enabled, S3 Screen Toys Device
Management Display Devices will report the following:
Step 7.
To revert to a single desktop display device, uncheck the box
below the clone device. The Status will report "will be disabled."
Click Apply All to complete the action.
option.
ChromoVision
full screen video.
User Guide for Chrome 400/500 Series Graphics
SG195-B.1 1/6/2009
33
Page
Advertisement
Table of Contents
