S3 Graphics CHROME 400 Series User Manual page 35

5.3.3.3 Step by Step Display Device Attachment
Windows XP has a less robust detection scheme than Windows Vista. If a re-
enumeration fails, and you wish to attach a new or second display output device
to your Windows XP system, use of the following procedure is recommended.
Step 1. While the system is powered off and unplugged, attach a new or
second display output device to your graphics board.
Step 2. Reconnect your cables. Power the new display device.
Step 3. Reboot the system.
Step 4. Install any display or monitor drivers needed.
User Guide for Chrome 400/500 Series Graphics
SG195-B.1 1/6/2009
35
Page