Table of Contents
Advertisement
2.4 Attach Video Cables
Video output connections must be correctly attached to your system to enable
the video display capabilities of your new S3 Graphics board.
The connections available on the bracket of your graphics board may look similar
to the following example.
CRT:
HDMI:
DVI:
Connect at least one display output device.
9. To output display to a DVI panel device, connect the DVI plug at the end of
your monitor cable to the DVI-I connector receptacle on your graphics board.
Receptacle for
DVI out
Cable with DVI plug
User Guide for Chrome 400/500 Series Graphics
SG195-B.1 1/6/2009
14
Page
Advertisement
Table of Contents
