Display Device Attachment And Detection - S3 Graphics CHROME 400 Series User Manual

5.3.3 Display Device Attachment and Detection

A device must be detected as connected and enabled before it can be configured
through S3 ScreenToys Device Management.
Devices can be added or removed in a hot-plug or hot unplug manner.
5.3.3.1 Force a re-enumeration
A re-enumeration of display devices can be done at any time by checking the Re-
detect display devices under Options dropdown list on the S3 ScreenToys
Device Management page.
5.3.3.2 New Display Device Configuration
If a device is removed or attached while the system is active, S3 Graphics
software will attempt to restore a previously saved configuration that matches the
new connected devices. However, if the S3 Graphics software has no existing
record of your preferences for a newly attached configuration, it may pop up a
New Display Configuration dialog.
User Guide for Chrome 400/500 Series Graphics
SG195-B.1 1/6/2009
34
Page