Basic Display Settings - S3 Graphics CHROME 400 Series User Manual

4.2 Basic Display Settings

General Display
Settings
Display Monitor
Icon area
For Windows Vista these settings appear on the Display
Settings/Monitor tab. For Windows XP these settings
appear on the Display Properties/Settings tab.
Use these settings to identify and adjust the
relationships between your monitors when you have
multiple display output devices.
This area contains the Monitor icons which represent the
relationships between your
displays.
If only one output device is
supported by your configuration
(as in the Windows XP example
at right), only one monitor icon
will appear and the display
selection and dragging options
described below will not be
available.
If two devices are supported, two rectangles will be
visible (as in the Windows Vista example below). The
rectangle with the number 1 will correspond to the
display device associated with the 1 in the Display
dropdown list below the monitor icon area. The 1 also
identifies the Primary Monitor (monitor showing the
Primary View, see Using Multiple Monitor section below
for further detail).
If the configuration can
support two display devices,
but there is no device
detected as a second
display, then the number 2
icon will be grayed out as in
the example at the right.
The device that is selected
under the Display list section (just below the monitor
icon area) is shown as a bright icon, indicating that it
represents the display now being configured.
The size of the display icons will change to reflect their
current resolution (adjustable in the Resolution
area).
Screen resolution)
User Guide for Chrome 400/500 Series Graphics
(XP
SG195-B.1 1/6/2009
23
Page