Typical Display Device Combinations - S3 Graphics CHROME 400 Series User Manual

5.3.1 Typical Display Device Combinations

Because S3 Graphics products are Dual Head devices, the single adapter can
drive more than one output device. The following output devices and device
combinations are those typically supported by S3 Graphics adapters and
software on desktop configurations. Additional combinations may be possible
with specialized hardware. Your hardware will not have connections to detect
and support all these combinations:
CRT
DVI
HDMI
Dual display combinations (board-dependent), for example, DVI + CRT,
DVI + HDMI, HDMI + CRT, DVI + DVI, HDMI + HDMI, and others
Multiple adapter multiple display combinations to the extent supported by
the operating system.
Mobile systems include at least a LCD display output device. Additional output
devices that could be supported for mobile environments by your S3 Graphics
adapter and software include: DVI, HDMI, CRT. Your hardware may not have
connections to detect and support all these devices.
The operating system provides some configuration controls for multiple display
devices through the Display Settings page. Additional control is provided by the
S3 Graphics S3 ScreenToys Device Management tool which provides
independent setting control for each connected monitor. Your selected settings
are saved automatically on exit. When you resume from power down,
suspend/standby, or monitor off, the settings will remain the same.
User Guide for Chrome 400/500 Series Graphics
SG195-B.1 1/6/2009
32
Page