S3 Graphics CHROME 400 Series User Manual page 60

Display Modes
(for 2 devices in
multiple monitor
clone mode)
Display Modes
(for extended
desktop
configurations)
asked to confirm your choice. The software may ask to
restart your computer if the number of colors changes.
If two display devices are connected and configured for
clone mode, then the CHROME® Monitor menu will
display 1. (Multiple Monitors).
The monitors to be affected by changes to Display
Modes are controlled through the CHROME Display
Devices menu.
Before selecting your new mode, first open Display
Devices and click one or both of the monitor options.
For example to change the mode for an attached DVI
and HDMI, check both devices. Then select Display
Modes. The modes available will represent only those
modes supported by both devices.
If only one display is checked in the Display Devices
submenu, then the Display Modes available will be the
list appropriate for the checked device.
When in Extended desktop, there will be both Display 1
Modes and Display 2 Modes submenus. Display 1
Modes submenu provides a list of supported desktop
modes for the display device which owns the Primary
View of your desktop. Display 2 Modes will provide a
separate list for the secondary display.
Make your independent mode selection for each display.
Select Display 1 Modes or Display 2 Modes, then
select the number of colors, then select the screen size.
Depending on your operating system, you may be asked
to confirm your choice. The software may ask to restart
your computer if the number of colors changes.
User Guide for Chrome 400/500 Series Graphics
SG195-B.1 1/6/2009
60
Page