Manual Configuration Of Hvac System On Thermostat - Alarm.Com ADC-T2000 Installation Manual
Smart thermostat
Hide thumbs
Also See for ADC-T2000:
- Product manual (21 pages) ,
- User manual (14 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
3. Wait 5 minutes for the system to turn on.
4. After verifying the cooling system is working, return the set point to the desired temperature.
Manual Configuration of HVAC System on Thermostat
The system type listed in the table below can be physically set on the thermostat by doing the following:
1. Put thermostat in OFF mode.
2. Press and hold the UP button for 5 seconds until the display shows a version number.
3. Press and hold the UP button again for 5 seconds until the display shows your HVAC setup.
4. Press the UP or DOWN buttons to select the thermostat configuration from the table below.
5. Press the MODE button to confirm your selection.
https://answers.alarm.com/Installation_and_Troubleshooting/Thermostats/Z-Wave_Thermostats/Alarm.com_Smart_Thermostat_(ADC-T2
Updated: Sun, 15 Oct 2017 23:38:59 GMT
Powered by
12
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ADC-T2000 and is the answer not in the manual?