Please wait for mild temperatures before testing the Questions? cooling system. • You must follow all local codes and ordinances for Visit answers.alarm.com wiring the system. or contact your service provider.
❶ ❷ ❸ In the box Overview ❷ ❶ Trim plate Thermostat ❶ ❷ Thermostat ❶ Status LED ❸ Display ❷ Button ❹ Drywall anchors x2 Display ❺ Wall screws x2 ❸ Settings menu ❹ Current setpoint To change the setpoint, ❹...
❸ • Damp areas will not only affect the humidity reading Turn off power to the HVAC unit. CAUTION: Wiring can vary for each manufacturer. Installation considerations but could lead to corrosion and shorten the lifespan Identify all wiring designations before removing of the thermostat.
❸ CAUTION: Do not insert more than one wire into a wire After all wires are inserted into the wire terminals, Thermostat installation Display installation terminal as this will damage the wire terminal. If you restore power to the HVAC system. only have one R wire, there is no need to physically jump RH and RC.
Test the system Additional configuration Troubleshooting Problem Cause CAUTION: Do not test the cool mode during • Although the default settings will be appropriate in cold weather. Wait for mild weather to most cases, you also have the option to change all fully test the system.
Page 7
Problem Cause Problem Cause How do I add the Smart • To find the Z-Wave settings, How do I reset my Smart I am moving or re-setting up my • The Smart Thermostat HD can be Thermostat HD to a Z-Wave Thermostat HD to the open the Navigation menu smart home network and need...
Page 8
être co-localisés ou fonctionner en conjunction avec une autre your HVAC control will not antenne ou transmetteur. behave as expected. Please contact your HVAC Questions? professional to remedy the situation as soon as possible. Visit answers.alarm.com or contact your service provider.
Need help?
Do you have a question about the ADC-T40K-HD and is the answer not in the manual?
Questions and answers