Rockler 57484 Instructions Manual

Rockler 57484 Instructions Manual

Drill press table and fence

Advertisement

Drill Press Table and Fence Instructions
Effective March 2022
Review full instructions prior to use for important safety information.
Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 57484 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rockler 57484

  • Page 1 Drill Press Table and Fence Instructions Effective March 2022 Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
  • Page 2 Instructions and safety warnings for your product (see the • Keep children and bystanders away from the tool Instructions link on the product page at Rockler.com). operating area; • Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes or dust;...
  • Page 3 PRODUCT SPECIFIC SAFETY WARNINGS > To avoid serious injury, keep hands and fingers away from the drilling area. Always maintain awareness of the bit. > TURN OFF AND DISCONNECT POWER to all tools > Do NOT overtighten the J-bolts on the mounting brackets BEFORE making any adjustments or changing accessories.
  • Page 4 PARTS LIST Quantity Drill Press Table Mounting Brackets #8 x 3/4" screws Aluminum Fence 12" Adjustable MDF Fence Face Dust Port 4-Star Fence Hold-Down Knob 1" Round Knob 5/16"-18 x 1" T-Bolt 10 5/16"-18 x 2 ⁄ " Fence T-Bolt 11 2 ⁄...
  • Page 6 Fig. 1 Installing the Table on Your Drill Press The Drill Press Table comes with four mounting brackets that you brackets along the left and right sides of the drill press’s table position to fit your drill press and attach to the underside with the so that the Drill Press Table can be removed after mounting, included screws.
  • Page 7 Fig. 2. overtighten. Check to make sure the Drill Press Table doesn’t shift. Fig. 1. Check Rockler.com for updates. If you have further questions, please 10. Reinstall the MDF sacrificial center insert. contact our Technical Support Department at 1-800-260-9663 or support@rockler.com...
  • Page 8 57484 Distributed by Rockler Companies, Inc. 1-800-279-4441 Rev 03/22 4365 Willow Dr. Medina, MN 55340 www.rockler.com...

Table of Contents