Assembly; Warning; Hardware Used; Attach Trim To Table Cabinet - Well Universal SWS221521 Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS:
As this table is very heavy, we strongly recommend
that at least two people work together to assemble it.
When assembling the table, it should be turned
upside down. When this is completed, the table can
be turned upright.
You may use the carton to protect the table top
during assembly
~WARNING:
The Accessory Drawer on this Shuffleboard Table is
capable of supporting a MAXIMUM of 25kgs (55LBS).
Please do not place additional items into the Accessory
Drawer which will increase the weight beyond the 25kgs
(55LBS) that it is designed to support.
Please do not sit or stand on drawer and do not allow
children to climb up onto the drawer as this could damage
the drawer and/or cause the Shuffleboard Table to tip
over causing damage or serious injury.
ASSEMBLY INSTRUCTIONS
1. -Attach Trim to Table Cabinet
With assistance from other adults, place Table
Cabinet (1) upside down on a clean, soft, and
smooth surface. Attach Trim (4) to the side of
the Table Cabinet using Short Bolts (B), Spring
Washers (C) and Flat Washers (D). Insert the
Short Bolts into the pre-drilled holes and tighten
all bolts with Hex Wrench (E) as shown in FIG. 1.
Hardware Used
0
SHORT BOLT
@1mmlm x4
G
SPRING WASHER
©>
x4
G
FLAT WASHER
@
x4
G
HEX WRENCH
~
X
1