D. Meap Application Counter - Canon ImageRunner C3170 Service Manual

D. MEAP Application Counter

In addition to the Soft Counter function, the MEAP Application Counter counts
the number of prints and scans per MEAP application.
There are two methods to display the MEAP Application Counter value:
1. The MEAP counter can be viewed from a web browser through a network
connected PC with the MEAP device by logging into the SMS
"Application/License Information" page.
2. To view the MEAP counter from the device itself, press "Counter Check"
on the control panel, then from the LCD screen, press the "MEAP
Counter" button.
Each MEAP application has its own counter. The number of applications that
can be installed on an imageRUNNER device is directly related to the number
of counters available. There are twenty (20) counters available for MEAP
applications. However, this imageRUNNER device uses two MEAP
application counters: one for the Portal Service and one for the Universal
Send. Therefore, the number of additional MEAP applications that can be
installed is eighteen. The Portal Service can be uninstalled to free up one
extra counter.
There are three types of MEAP applications:
1. Applet - a user interface for the application is on the control panel of
2. Servlet - a remote user interface is available for the application.
3. Esplet - there is no user interface for the application.
Applet type applications used directly from the control panel are limited to
nine (three tabs in each pane times three panes).
E. Power and Plug Requirements
The imageRUNNER C3170 Series requires a NEMA 5-15R receptacle for
proper operation (See Figure 1). In addition, Canon USA Inc. strongly
suggests a dedicated and properly grounded outlet be provided for this
machine. Before installation, confirm that a dedicated NEMA 5-15R
receptacle is available for this machine.
imageRUNNER C3170 Series Service Guide
the copier.
Figure 1
NEMA 5-15R Receptacle
imageRUNNER C3170 Series Service Guide
Rev. 0 July 2005 Page 12