Steering Sensor - Yamaha WaveRunner GP1300R Supplementary Service Manual

Hide thumbs Also See for WaveRunner GP1300R:
Table of Contents

Advertisement

+
ELEC
1
2
OFF THROTTLE STEERING SYSTEM

STEERING SENSOR

1. Check:
• Steering sensor
Malfunction → Replace the steering
sensor.
Checking steps:
• Turn the handlebar all the way to the left
or right, and then release it.
• Install a plastic tie 1 loosely around the
center of the handlebar grip as shown.
• Hook a spring gauge 2 onto the plastic
tie.
• Hold the spring gauge at a 90° angle
from the handlebar, and then pull the
spring gauge with a force of 100 N
(10 kgf, 22 lb).
• Check that the following is displayed in
the "Engine Monitor" window of the
Yamaha Diagnostic System.
When handlebar
pulled
ON
• Use the same procedure to check that
the steering sensor operates correctly
when the handlebar is turned to both the
left and right. Replace the steering sen-
sor if it is malfunctioning.
41
E
When handlebar
not pulled
OFF

Advertisement

Table of Contents
loading

Table of Contents