THERMOSTAT ASSEMBLY
Insert the O-ring (1) in its appropriate seat on the cover
of the thermostat.
Check the condition of the O-ring previously utilised.
If the O-ring is not in good condition, substi-
tute it with a new one.
Apply a thin layer of silicone grease.
Recommended grease: Silicone Grease.
Insert the thermostat (1) into its seat within the cover.
L
During the assembly of the thermostat ensure that the
hole (2) on the external flange of the thermostat is
aligned with the curved working (3) on the cover.
Cooling system
- 24 -
1
1
2
3