MV Agusta F4 750 Instructions Manual page 17

The following two phases apply ONLY to the following
models:
• F4 ORO
• F4 S and F4 S 1+1 (up to frame registration num-
ber 004611).
Fix the electric lead of the lower radiator cooling fan to
the support frame of the fan, utilising two strap fasten-
ers (1) and position them as indicated in the figure.
Pass the indicated fastener to the side of the nut as
indicated in the figure.
To avoid possible contact between the elec-
tric lead and the exhaust tube, ensure that
the lead is correctly positioned.
The following two phases apply ONLY to the following
models:
• F4 S and F4 S 1 + 1 (from frame registration
004718).
At the point of entry into the body of the lower fan, the
electric lead must be placed as shown in the figure to
avoid accidental damage by the blades of the fan and
also with the exhaust tube of the engine. Place the tem-
perature-resistant sheathing (1) on the electric lead sur-
face. Fasten the electric lead to the support of the lower
fan using a metal clamp (2) as shown in the figure.
Cooling system
- 17 -
1
1
2
L