Milwaukee M18 FMCS Operator's Manual
  1. Manuals
  2. Brands
  3. Milwaukee Manuals
  4. Saw
  5. M18 FMCS
  6. Operator's manual

Milwaukee M18 FMCS Operator's Manual

Fuel, 135mm 5-3/8", 150mm 5-7/8" metal saw
Hide thumbs Also See for M18 FMCS:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
Cat. No.
M18 FMCS
M18™ FUEL™ 135mm (5-3/8") / 1
mm (5-7/8") METAL SAW
WARNING
To reduce the risk of injury, user must read and understand operator's manual.

Advertisement

Table of Contents
loading

Related Manuals for Milwaukee M18 FMCS

Summary of Contents for Milwaukee M18 FMCS

  • Page 1 OPERATOR'S MANUAL Cat. No. M18 FMCS M18™ FUEL™ 135mm (5-3/8") / 1 mm (5-7/8") METAL SAW WARNING To reduce the risk of injury, user must read and understand operator's manual.

  • Page 2: Safety Warnings

    GENERAL POWER TOOL at all times. This enables better control of the power SAFETY WARNINGS Read all safety warnings, instruc- WARNING • Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from tions provided with this power tool. Failure to moving parts.
  • Page 3 the top surface of the wood causing the blade to climb eyes, additionally seek medical help. operating procedures or conditions and can be avoided by taking proper precautions as given below: sive temperature. Kickback could cause the • Follow all charging instructions and do not charge controlled by the operator, if proper precautions are Charging im- cut for any reason, release the trigger and hold...
  • Page 4 To reduce your SPECIFICATIONS exposure to these chemicals: work in a well ventilated Cat. No..........M18 FMCS area, and work with approved safety equipment, such Volts.............. 18 DC as those dust masks that are specially designed to Battery Type ..........M18™...
  • Page 5 If the transparent guard is cracked ing upwards. To remove the bolt from the spindle, ® or broken, return it to a MILWAUKEE service facility push in the spindle lock button. While holding in the for replacement. Never use the metal cutter with a spindle lock button, use the wrench provided with damaged or missing transparent guard.

  • Page 6: Overload Protection

    If the brake misses frequently, the ® 3. To start the saw, push the lock-off button down saw needs servicing by an authorised MILWAUKEE while pulling the trigger. Allow the motor to reach service facility. The brake is not a substitute for the full speed before beginning cut.
  • Page 7 Return the tool, battery pack, and ® charger to a MILWAUKEE service facility for repair. After six months to one year, depending on use, return the tool, battery pack and charger to a ®...
  • Page 8 SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...

Table of Contents