Milwaukee M18 FMCS Original Instructions Manual
Hide thumbs
Also See for M18 FMCS:
- Operator's manual (8 pages) ,
- Original instructions manual (131 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Milwaukee M18 FMCS
Summary of Contents for Milwaukee M18 FMCS
- Page 1 M18 FMCS Original instructions...
- Page 2 Technical Data,Safety Instructions, Specified Conditions of Use, Declaration of Conformity, Batteries, Maintenance, Symbols Please read and save these instructions!
- Page 4 78-100 % 55-77 % 33-54 % 10-32 % <10 %...
- Page 6 3. 3.
- Page 7 TEST...
- Page 8 START STOP For safety reasons this power tool is fitted with a switch lock and the On-/Off switch cannot be locked in the „On“ position...
- Page 9 Insulated gripping surface...
- Page 10 Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece.
- Page 11 0-57 0-57 mm...
- Page 12 START 2. 3. STOP...
- Page 15 max. > 57 mm 57 mm...
-
Page 17: Technical Data
TECHNICAL DATA M18 FMCS Metal saw Production code 4696 13 03 ..000001-999999 Battery voltage 18 V No-load speed 3900 min Saw blade dia. x hole dia 150 mm x 20 mm (5-7/8") Saw blade thickness 1,3 mm Blade teeth Max. -
Page 18: Electric Brake
Kickback causes and related warnings c) The lower guard may be retracted manually only for special cuts such as "plunge cuts" and "compound cuts". – kickback is a sudden reaction to a pinched, jammed or misaligned Raise the lower guard by the retracting handle and as soon saw blade, causing an uncontrolled saw to lift up and out of the as the blade enters the material, the lower guard must be workpiece toward the operator;... -
Page 19: Transporting Lithium Batteries
Do not store the battery pack together with metal objects (short components need to be replaced which have not been described, circuit risk). please contact one of our Milwaukee service agents (see our list of Never break open battery packs and chargers and store only in dry guarantee/service addresses). - Page 20 GB-DECLARATION OF CONFORMITY We declare as the manufacturer under our sole responsibility that the product described under „Technical Data“ fulfills all the relevant provisions of the following Regulations S.I. 2012/3032 (as amended), S.I. 2008/1597 (as amended), S.I. 2016/1091 (as amended) and that the following designated standards have been used: BS EN 62841-1:2015 BS EN 62841-2-5:2014...
- Page 21 Copyright 2020 Techtronic Industries GmbH Techtronic Industries (UK) Ltd Max-Eyth-Straße 10 Fieldhouse Lane 71364 Winnenden Marlow Bucks SL7 1HZ Germany +49 (0) 7195-12-0 (11.20) www.milwaukeetool.eu 4100 4252 32...