Tilt Scale Backrest - Invacare Rea Dahlia 30 Service Manual

2.3 Tilt scale backrest

1.
A
C
Attach the clamps A with the tilt scale C to the push
bar/push handles or the backrest tubes and tighten the
screws B.
2.
Place the end plugs D in the empty holes.
3.
Place the tilt scale for the backrest angle on the push
bar/push handle or on the backrest tubes according to
picture E or F above.
2.4 Tilt scale seat
1.
A
Place the tilt scale for the seat A on the seat frame B.
1572308-G
B
B
The tilt scale should be placed on the left side.
2.5 Mounting the Drip stand
The rod of the drip stand must always be placed in
a vertical position, i.e in a 90 degree angle to the
ground, no matter the position of the backrest or
the wheelchair.
90°
1.
A
Mount the holder for the drip stand A on the neckrest
holder and tighten the screw B.
allen key 5 mm
2.
Mount the lever C, the washers D and the holder with
the drip stand E in the attachment and tighten the lever.
Assembly
90°
B
7