Assemble Posture Belt To Rear Attachment - Invacare Rea Dahlia 30 Service Manual

Rea® Dahlia® 30 / 45
WARNING!
Risk of injury
– The attachment A must not be used for safety
belts when transferring the user in a vehicle.

3.18.2 Assemble posture belt to rear attachment

B
A
When using the posture belt for positioning of the thighs,
the attachment slot A on the backrest attachment B can
be used.
WARNING!
Risk of injury
– The attachment slot A must not be used for
safety belts when transferring the user in a
vehicle.
3.19 Adjusting the width of the accessory tray
A
1. Loosen the 2 screws and nuts B on the accessory tray
A, but do not remove them.
2. Adjust to the desired depth.
3. Re-tighten the screws again.
• 5 mm allen key
• 13 mm fixed spanner
34
B
3.20 Adjusting the depth of the accessory tray
1.
A
Loosen the screws B and the nuts C and remove the
main plate A.
Tools: 5 mm allen key, 13 mm spanner
2.
A
Turn the main plate A 180º.
A
Re-mount the turned main plate A and re-tighten the
screws B and nuts C.
In this position, the anti-tip device can not be folded.
3.21 Brake attachment
WARNING!
Poor brake effect
– After every adjustment of the brake, make sure
to adjust and test the brake effect.
– See section "User brake — adjustment" for
more information.
The brake attachment can be mounted in four different
positions:
B
C
C
1572308-G