Invacare Rea Dahlia 30 Service Manual page 40

Rea® Dahlia® 30 / 45
Components
Castors
All fasteners for wear and
tightness
Accessories
Lubricate all removable parts with a dry teflon based spray, e.g "Viso 900–B5".
All fasteners for wear and
tightness
Headrest
Neckrest
Trunk support "Multi
functional"
Abduction cushion
Table tray
40
• Detach the castors and clean the castor forks.
• Remove any dirt or hair from the castors.
• Attach the castors again and check that the castors turn freely.
• If the castors are air filled, check the pressure — recommended max air pressure is
written on the tire.
• If the castors are solid, check the tires for cracks. If the tires are dry and filled with
cracks, they need to be replaced.
Bolts and other fasteners can come loose due to constant use:
1. Check that the fasteners are tight on the castor forks, footrest, seat, side rests, backrest,
handles etc.
2. Tighten any loose bolts or screws.
Bolts and other fasteners can come loose due to constant use:
1. Check that the fasteners are tight on the castor forks, footrest, seat, side rests, backrest,
handles etc.
2. Tighten any loose bolts or screws.
• Check that the side- and angle adjustment for the "wings" works properly.
• Check that the angle adjustment works and that there is a memory function.
• Check that the angle adjustment works and that there is a memory function.
• Check that the angle adjustment works properly and that there is a memory function.
• Check that the depth adjustment works.
• When re-mounting the table tray, try to find the thread manually before fastening the
screws with tools. This spare the threading.
1572308-G