Table of Contents
Advertisement
8. Apply a small amount of the included grease to the
Handlebar Axle (33). Insert the Handlebar Axle into
the Frame (1) and center it. (Note: It may be helpful
to use a rubber mallet to insert the Handlebar Axle.)
Next, slide the Left and Right Handlebars (7, 9) onto
the Handlebar Axle. Make sure that the
Handlebars are on the correct sides.
Using the included pedal tool, tap a Push Nut (78)
onto each end of the Handlebar Axle (33). Make
sure that the Push Nuts are turned as shown in
the inset drawing. (Note: It may be helpful if anoth-
er person holds a block of wood against one end of
the Handlebar Axle while you tap a Push Nut onto
the other end.) Then, tap the Large Axle Cap (49)
onto each end of the Handlebar Axle.
9. Identify the Left Link Arm (15), which is marked with
a sticker.
Apply a small amount of grease to an M8 x 77mm
Button Bolt (58). Insert the Button Bolt into the Left
Handlebar Base (8). Slide an M8 Flat Washer (73),
a Link Arm Bushing (45), the Left Link Arm (15), and
another M8 Washer (73) onto the Button Bolt. Make
sure that the Link Arm Bushing and the Left
Link Arm are turned as shown. Tighten an M8
Nylon Locknut (66) onto the Button Bolt. Rest the
notch in the Left Link Arm on the left lock rod.
Attach the Right Link Arm (not shown) to the Right
Handlebar Base (not shown) in the same way.
10. Remove the 1/2" Pedal Nut (68) from the shaft on
one of the Pedals (23). Make sure that there is a
Pedal Spring (42), a Red Washer (71), a Pedal
Bushing (43), a Black Pedal Washer (79), and a
Pedal Spacer (44) on the shaft of the Pedal. In addi-
tion, make sure that the Pedal Bushing (43) is
turned as shown. Next, firmly tighten the shaft of the
Pedal clockwise into the left Crank Arm (26), and
tighten the Pedal Nut (68) back onto the shaft.
Attach the other Pedal (not shown) in the same way.
11. Make sure that all parts are properly tightened before you use the exercise cycle. Place a mat
beneath the exercise cycle to protect the floor.
8
Grease
7
78
49
9
8
73
58
Grease
Lock
Rod
10
42
71
23
8
9
1
33
Pedal Tool
78
66
73
45
15
Notch
26
68
44
79
43
49
33
Advertisement
Table of Contents
