Opticon H-15 User Manual page 86

In the "Service Type" list, select POP3 Mail or IMAP4 Mail. (POP3 is the most
common mail protocol for ISPs).Enter a unique name for e-mail service in the "Service
name" field. This name cannot be changed later.
Select "OK".
The Mail Service Setup wizard appears after you add a service. If you are adjusting the
setting of an existing service, select Service> Options, select the service you are
using, and then Properties. In the Service Definition dialog box, complete the
following entries as needed:
Connection: Select the name of the connection you created to connect to the mail
server. If you are receiving e-mail through a network(Ethernet) connection, select
Network Connection. If you want Inbox to use your current connection, select
(none). If you have not created a connection, select Create new connection.
Double-tap the "Make new Connection" icon, and follow the instructions in wizard.
When finished, select Inbox in the Taskbar and continue setting up Inbox.
POP3 Host(POP3 only): Enter the name of the mail server you use to receive and
send messages.
Server(IMAP4 only): Enter the name of the mail server you use to receive and send
messages.
User ID: Enter the user name or mailbox ID assigned to you.
Password: Enter the password you use to access this mail account. If you do not
want to be prompted to enter the password each time you connect, select "Save
password".
Domain(Windows NT): Enter your Windows NT domain name. This name is
required only when connecting to networks, such as a corporate network, that use
Windows NT domain security. This is not required for most ISP accounts. If you
have trouble connecting, try clearing this box.
SMTP Host: If your mail service uses a separate server for SMTP, enter the name
in the box. If you're setting up a POP3 Mail service with an ISP, the ISP must use an
SMTP mail gateway.
Return Address: By default, the return address is set to username@POP3host or
username@Servername. Depending on the service you are using. If this is not
your e-mail address, enter the correct address in the box.
Set general preferences:
If you are adjusting the setting of an existing service, select Service> Options, select the
service you are using, select Properties, and then select Next. In the General
Preferences dialog box, choose any of the following settings, all of which are optional:
Disconnect service after actions are performed: Select to automatically
5-2
OPTICON
User's manual
H-15