Table of Contents
Advertisement
2.3.2 Charging the PDT with Cradle and Power Adapter
1. Put PDT into Single Dock.
2. Plug in the connector of the power adapter to the Single Dock.
3. Connect the power cord to the power adapter.
4. Connect the power cord to a power source.
5. Charging time : to charge the battery pack for the first time, it needs approximately 6
hours. Subsequent charging time is approximately 4 hours.
When charging the battery pack, the charge LED indicator on the PDT turns on Red.
After the battery pack is fully charged, the charge LED indicator turns to Green.
Figure 2-7 Charging with CRD-15 cradle
2-20
OPTICON
User's manual
H-15
Advertisement
Table of Contents
