2.2.6 Details of cradle In no event, Opticon Sensors Europe will be liable for any direct, indirect, consequential or incidental ANDLING PRECAUTIONS damages arising out of use or inability to use both...
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE page PIN OUT RS232 cable for terminal RS485 cable for cradle network RS232 cable for cradle INTRODUCTION SPECIFICATIONS PECIFICATIONS ERMINAL This terminal is a compact, programmable 6.1.1 Electrical specifications handheld terminal, and is well suited for a 6.1.2 Optical specifications variety of indoor portable applications.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE 2.1 UNPACKING When you remove the packing, please check for any physical damage. We recommend that you save all packing material, as it should be used whenever you need to ship your terminal (eg.
13. Hand strap pillar for attaching hand strap 14. Electrical contacts for power supply from the cradle IRU2700 to terminal. Clean regularly! 15. RS-232C connector for connecting external device, or for system expansion, through Opticon RS232 cable...
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE Description of the function keys Description of the display indicators In the shift mode the function keys can have additional control functions. Some typical Main Battery indicator options are described below. The user’s Off: Sufficient battery power application can give different definitions to the On: Battery low.
2.2.6 Details of cradle 1. DC input socket input for AC adaptor 2. RS 485 socket for connecting another cradle in multi-drop RS485 network, through Opticon RS485 cable 3. RS 232 C socket for connecting to PC or modem, through Opticon RS232 cable 4.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE Use of the terminal 2.3 HANDLING PRECAUTIONS Operate the terminal keys by pressing them lightly with your To avoid malfunctioning and to ensure years fingertips or with something soft of trouble free operation, pay attention to the and round.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE 2.4.2 Cradle 2.4 ASSEMBLY Place for mounting Follow the next steps to make your terminal Place the cradle in normal office ready for installation in a system, that is conditions. described further in the manual. Avoid a place under strong light.
Only the rechargeable Ni-MH battery To maintain the capacity of the backup pack of Opticon can be charged inside battery take also the backup battery out the terminal in the cradle IRU2700. Other when storing the terminal.
8 hours when the terminal is placed in the cradle. Dry cel Opticon batteries (Alkaline). To be used together with Opticon battery case for dry cell batteries. When the battery case with penlite These batteries are not rechargeable.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE 2.5.5 How to (re)place the main battery in the terminal? ----> open Only use batteries as specified in paragraph 2.5.1. If you have data stored, make sure the backup battery is placed and full enough, to avoid data loss.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE 2.5.6 How to (re) place the backup battery in the terminal? Make sure that the main battery is full enough while changing the backup battery. Only use CR2032 Li (Lithium, button type) battery. Unlock cover: Open the switch (shift to the right) and remove the battery case cover (ref.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE 2.6.1 Terminal to computer 2.6 INSTALLING IN A SYSTEM PHL 2700 HOST Exercise caution at all times when working with AC-powered equipment. Turn off your devices before 3 POLE installation. CONNECTOR RS 232 2.6.2 Single cradle to computer...
At first the user application must be loaded before the terminal can be used for barcode scanning. Tools for developing a user application on the PC for use on the terminal, as supplied by Opticon are: SWITCH FUNCTIONS DEFAULT Application Generator...
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE The terminal is a Class I laser product conforming to the strictest laser safety standards. However, we recommend that you avoid looking directly into the laser beam emitter, or pointing the laser beam directly into someone’s eyes.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE PIN-OUT 5.1 RS232 cable for terminal PHL1700 5.2 RS485 cable for cradle network RS232 Jack DB 9 cable IRU2700 plug Signal connector Signal 3 pole Female (terminal) (PC) 5.3 RS232 cable for cradle IRU2700 Network Modular Modular...
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE 6.1.2 Optical specifications Light source 650 nm visible laser diode Scan rate 100 scans/sec Decode rate 100 decodes/sec Reading width 62 mm at 30 mm 111 mm at 100 mm Resolution 0.15 mm (6mil) at PCS 0,9 SPECIFICATIONS Depth of field...
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE Keyboard 27 keys total SPECIFICATIONS CRADLE (26 keys user definable) Keyboard function keys 8 Function keys Keyboard mode Alpha/Numeric mode 6.2.1 Electrical specifications Programming Functionality is provided by user application. The Voltage requirement 9 V DC application may be down Battery charging time...
It is possible that you may not solve the a new one. problems, despite our descriptions. In this instance, please contact your dealer or Opticon. When the terminal needs to be repaired, please ensure that the label with the serial number is still present. If sending the terminal or cradle, please use the original packing to minimise the chances of damage.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE 7.2 READ OPERATION 7.3 BATTERY CHARGING PROBLEMS PROBLEMS When the terminal is placed in the cradle, When the terminal has a problem with the main battery is not charged. reading the label: Red LED indicator on the terminal is The resolution of the bar code is too flashing on and off.
’ PHL2700 / IRU2700 S MANUAL TERMINAL CRADLE 7.4 TERMINAL PROBLEMS Terminal gets no power, when pressing the Terminal does not respond to key presses, powerkey. while the display stays on. The main battery is exhausted. Message “Application halted” or “No application installed”...
Apart from the cradle, additional items might be ordered. might be ordered. Article Code Article Code Cradle Terminal IRU2700-S O2540000015 PHL 2700-80 (8MB) A73800R0040 Power supply for cradle Battery pack for terminal 9V DC adaptor A50200N0020 Rechargeable Battery Pack O2540000020 Battery Case Holder Q2510000040...