Table of Contents
Advertisement
b)Place the spare battery pack into the CRD-15 spare battery charging slot :
1. Connect the power cord to the power adapter
2. Plug in the connector of the power adapter to the CRD-15
3. Connect the power cord to a power source
4. Insert the battery pack into the CRD-15 spare battery slot
When charging the battery pack in the CRD-15 spare battery slot, the CRD-15
charging LED indicator turns on Red.
After the battery pack is fully charged, this LED indicator turns to Green.
CAUTION:
Do not remove the battery pack too long from PDT after you have already
full-charged the battery pack and backup battery pack and start to use the PDT.
Otherwise the data stored inside SDRAM memory will be lost. Please also keep in
mind power the PDT off if you want to change the main Battery pack.
Figure 2-9 Charging with CRD-15 cradle
2-22
OPTICON
User's manual
H-15
Advertisement
Table of Contents
