Table of Contents
Advertisement
Appendix B: Award BIOS Setup Utility
Figure B-17
Set user password
Save & Exit Setup
When all the changes have been made, highlight Save & Exit Setup and press <Enter>. Type Y
and press <Enter>. The modifications you have made will be written into the CMOS memory, and
the system will reboot. You will once again see the initial diagnostics on the screen. If you wish to
make additional changes to the setup, press <Ctrl> <Alt> <Esc> simultaneously or <Del> after
memory testing is done.
Figure B-18
Save & exit setup
B-22
Return to
Section Topics
KPXI System Controller User's Manual
KPXI-CON-900-01 Rev. A / January 2007
Advertisement
Table of Contents
