Table of Contents
Advertisement
KPXI System Controller User's Manual
Safety symbols and terms
The following symbols and terms may be found on the Model KPXI-CON System Controller or
used in this manual.
The
manual.
The
precautions to avoid personal contact with these voltages.
The
prevent burns.
The WARNING heading used in this manual explains dangers that might result in personal injury
or death. Always read the associated information very carefully before performing the indicated
procedure.
The CAUTION heading used in this manual explains hazards that could damage the unit. Such
damage may invalidate the warranty.
Features
Model KPXI-CON controller features
KPXI-CON-900-01 Rev. A / January 2007
symbol indicates that the user should refer to the operating instructions located in the
!
shows that high voltage may be present on the terminal(s). Use standard safety
symbol
symbol on an instrument shows that the surface may be hot. Avoid personal contact to
•
Standard 3U PXI form factor
•
PICMG 2.0 CompactPCI Specification R3.0 compliant
•
PICMG 2.8 PXI Specification Rev. 2.2 compliant
•
Designed for Pentium® M processor, FSB 400MHz, CPU frequency up to 1.8GHz
•
Two 200-pin DDR SO-DIMM sockets supporting up to 2GB RAM
•
One 44-pin EIDE (primary IDE) with built-in 2.5" low profile HDD (40 GB, standard)
•
Two CompactFlash interfaces for HDD and FDD replacement; CF Type II supports hot-
swappable CF card functionality
•
Two USB 2.0 ports, two serial ports (RS-232) and one parallel port provided on the front
panel
•
One AC '97 stereo audio output
•
One TRIG I/O on the front panel for advanced PXI trigger function
•
VGA output on the front panel supporting up to 2048 x 1536 resolution at 75Hz
®
•
Intel
82545EM controller providing one 10/100/1000 Mb Ethernet port
•
Supports 7 bus-master PCI devices on PXI/CompactPCI bus
•
Programmable watchdog timer
Return to
Section Topics
Section 1: Introduction
1-3
Advertisement
Table of Contents
