Table of Contents
Advertisement
REPACKAGING PROCEDURE Cont.
9. Place all poles in crate.
REPAIR PROCEDURE
1. To repair a tear in the fabric, first clean the surface where the patch is to
be applied. Cut the patch in a circular or oval shape from the vinyl that is
included in the field repair kit to cover the tear. The patch should have 2" (5
cm) of material around the outside of the tear.
2. Apply vinyl adhesive to the back of the vinyl patch and press over the
desired area. Hold for several seconds to allow adhesion to occur. Make
sure all the edges of the patch are glued down to prevent from peeling off.
3. To replace a tie tie, apply vinyl adhesive to a replacement tie tie and press
onto tent. Hold for several seconds to allow adhesion to occur.
22
Repacking / Repair Procedure
11. Place tent membrane in crate and close.
10. Place all fittings, straps, stakes,
& pin & bails in crate.
Advertisement
Table of Contents
