Table of Contents
Advertisement
Quick Links
20' x 30' MASTER SERIES HIGH PEAK
FRAME TENT SECTIONAL PRODUCT MANUAL
Read this manual before using this product. Failure to do so can result in serious injury.
The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood by the user that common sense and caution are factors
which cannot be built into this product, but must be supplied by the installer and/or user.
Tent, canopy, structure, and shelter products are manufactured for use as temporary structures and do not meet
structural code unless specified. Since weather is unpredictable, the installer/end user must incorporate their
own good judgment, common sense and knowledge of local conditions with the installation instruction guide-
lines. The installer is responsible for anticipating weather severity for proper time and method of installation.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
SAVE THIS MANUAL
NOTICE
WARNING SYMBOLS AND DEFINITIONS
A Division of
ver.20150220
Advertisement
Table of Contents
Related Manuals for Celina MASTER SERIES
Summary of Contents for Celina MASTER SERIES
- Page 1 20’ x 30’ MASTER SERIES HIGH PEAK FRAME TENT SECTIONAL PRODUCT MANUAL ver.20150220 Read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL NOTICE The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
-
Page 2: Product Specifications
Description 20’ x 30’ Master Series High Peak Frame Tent, Sectional The Master Series High Peak Frame Tent combines the ease and speedy in- stallation of the standard Master Series Frame Tent system with the elegant appearance and design of a high peak tent. Just like the standard Master Series Frame tents, The Master Series High Peak is made with fewer pieces of hardware and a tensioned valance for a smooth, tight appearance. -
Page 3: Personal Safety
Some soils require different staking or securing methods than what may be/have been purchased with the standard tent package. Celina Tent’s instructions, YouTube videos, and Layout Handbook summarize all the functions of each product, the rules for using them and suggestions for their use. - Page 4 Celi- na’s responsibility is limited to the manufacture of the tent parts and materials. It is the installer’s responsibility, not Celina’s, to determine the appropriate number of stakes to meet the necessary wind loads on the installation site.
-
Page 5: Required Hardware
REQUIRED HARDWARE 20’ x 30’ Master Series High Peak Frame Tent, Sectional Description (Key) Size/ Color Qty. Picture Hip Rafter 14’4” / Red Rafter 10’6” / Green Spreader 9’4” / White Peak Extension Pole 4’9” Legs 7’8” / Black Corner... -
Page 6: Optional Accessories
Master Series B. Loop Strap Ratchet Assembly C. Master Series Ratchet Buckles Loop Strap w/ O Ring D. Master Series Loop Strap 20’ x 30’ Master Series High Peak Frame Tent www.GetTent.com / www.CelinaTent.com © 2013 Celina Tent Inc. PG.6... - Page 7 20’ x 30’ Master Series High Peak Frame 30’ Master Series Base Plates Peak Extension Pole Crown Adapter F45MHPCA 20’ Double Head Stake Double Head Stake 20’ x 30’ Master Series High Peak Frame Tent www.GetTent.com / www.CelinaTent.com © 2013 Celina Tent Inc. PG.7...
-
Page 8: Installation Instructions
Secure the ring adapter by attaching the nut and lock washers to the bolts. e. Repeat with other crown adapter. 6. Fasten the loop strap (B) around the fitting at each leg location. 20’ x 30’ Master Series High Peak Frame Tent www.GetTent.com / www.CelinaTent.com © 2013 Celina Tent Inc. - Page 9 Make sure the tent top is centered. 10. Loop the perimeter cord around the outside post of each corner. 20’ x 30’ Master Series High Peak Frame Tent www.GetTent.com / www.CelinaTent.com ©...
- Page 10 14. In windy conditions, locate the downwind side of the tent to lift first; this keeps the wind from catching the tent. 15. Step on the master series base plate to free both hands and lift one side of the tent frame. Do not lift one corner at a time;...
- Page 11 20. Make sure the legs are straight then secure the master series base plates by driving a double-headed stake through the smaller tubing on the master series base plate. Tighten all ratchet assemblies.
- Page 12 INSTALLATION INSTRUCTIONS Striking Instructions 1. Loosen all ratchet assemblies. 2. Remove the stakes from master series base plates. 3. Remove the interior side tee ratchet assemblies. 4. Remove the side legs leaving the 4 corner legs. 5. Unfasten all anchoring devices from the perimeter tubing (with the exception of 2 at each corner).
-
Page 13: Product Warranty
PRODUCT WARRANTY Celina Tent Inc. warrants that this product will be free from defects in material and workmanship for a period of one (1) year following the date of purchase. Defects are limited to any defect which is a result of the manufac- turing process. - Page 14 Celina, Ohio 45822-9210 USA Telephone: 419-586-3610 YouTube: http://www.youtube.com/user/celinatent Fax: 419-584-0949 Facebook: http://www.facebook.com/celinatent Website: www.GetTent.com Google +: http://goo.gl/qvVdv Email: support@celinatent.com Twitter: http://twitter.com/celinatent LinkedIn: http://www.linkedin.com/company/celina-tent-fabric-structures 20’ x 30’ Master Series High Peak Frame Tent www.GetTent.com / www.CelinaTent.com © 2013 Celina Tent Inc. PG.14...