Table of Contents
Advertisement
Quick Links
20' x 40' PINNACLE SERIES HIGH PEAK
FRAME TENT 1 PC. PRODUCT MANUAL
Read this manual before using this product. Failure to do so can result in serious injury.
20' x 6.1 m
The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood by the user that common sense and caution are factors
which cannot be built into this product, but must be supplied by the installer and/or user.
Tent, canopy, structure, and shelter products are manufactured for use as temporary structures and do not meet
structural code unless specified. Since weather is unpredictable, the installer/end user must incorporate their
own good judgment, common sense and knowledge of local conditions with the installation instruction guide-
lines. The installer is responsible for anticipating weather severity for proper time and method of installation.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
003-0029 REV B
SAVE THIS MANUAL
NOTICE
WARNING SYMBOLS AND DEFINITIONS
40' x 12.2 m
Advertisement
Table of Contents
Related Manuals for Celina PINNACLE SERIES
Summary of Contents for Celina PINNACLE SERIES
- Page 1 20’ x 40’ PINNACLE SERIES HIGH PEAK FRAME TENT 1 PC. PRODUCT MANUAL Read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL 40’ x 12.2 m 20’ x 6.1 m...
-
Page 2: Product Specifications
PRODUCT SPECIFICATIONS Description 20’ x 40’ Pinnacle Series High Peak Frame Tent, 1 Piece Pinnacle High Peak Cross Cable tents are designed with a high peak tube supported by cross cables extending from each corner tube, maximizing the usable space underneath while at the same time eliminating the need for interior frames or support poles. -
Page 3: Personal Safety
Some soils require different staking or securing methods than what may be/have been purchased with the standard tent package. Celina Tent’s instructions, YouTube videos, and Layout Handbook summarize all the functions of each product, the rules for using them and suggestions for their use. - Page 4 Celi- na’s responsibility is limited to the manufacture of the tent parts and materials. It is the installer’s responsibility, not Celina’s, to determine the appropriate number of stakes to meet the necessary wind loads on the installation site.
-
Page 5: Required Hardware
2” Ratchet w/ Loop Strap 5’ Strap/Loop B. Loop Strap 8’ Strap/Loop Single Head Stake 36” or 42” Carabiner 4.28” x 2.39” Sidewall(s) 20’ 20’ x 40’ Pinnacle Series High Peak Frame Tent/Cross Cable Marquee GetTent.com/CelinaTent.com/GetTent.co.uk © 2018 Celina Tent Inc. PG.5... - Page 6 Corner Fitting Spreader Inserts Spreader Bar Cross Cables Side Tee Fittings Legs Sidewalls Optional Carabiner Single Head Stake Anchoring Hook Base Plate 20’ x 40’ Pinnacle Series High Peak Frame Tent/Cross Cable Marquee GetTent.com/CelinaTent.com/GetTent.co.uk © 2018 Celina Tent Inc. PG.6...
-
Page 7: Installation Instructions
O ring is the last strap to be secured. This ring and strap will allow for better grip when securing the top over the last fitting. Corner Fitting Side Tee Fitting 20’ x 40’ Pinnacle Series High Peak Frame Tent/Cross Cable Marquee GetTent.com/CelinaTent.com/GetTent.co.uk © 2018 Celina Tent Inc. PG.7... - Page 8 12. Fasten the 6’ series loop strap (D) to each corner and side tee through the two metal O rings on the tent top, then through the end loop and tighten. 20’ x 40’ Pinnacle Series High Peak Frame Tent/Cross Cable Marquee GetTent.com/CelinaTent.com/GetTent.co.uk ©...
- Page 9 15. Install the remaining three legs (8’) and ratchet assemblies; be sure the smaller holes of the base plate are facing the interior of the tent. 20’ x 40’ Pinnacle Series High Peak Frame Tent/Cross Cable Marquee GetTent.com/CelinaTent.com/GetTent.co.uk © 2018 Celina Tent Inc.
- Page 10 Tuck the ends of each sidewall between the ratchet assembly and the tent leg. Make sure the sidewall is centered between the two legs. 20’ x 40’ Pinnacle Series High Peak Frame Tent/Cross Cable Marquee GetTent.com/CelinaTent.com/GetTent.co.uk ©...
- Page 11 13. Disassemble all cables and fittings. Work from the perimeter of the frame inward. 14. Fold and roll up the drop cloth. 15. Remove remaining stakes. 20’ x 40’ Pinnacle Series High Peak Frame Tent/Cross Cable Marquee GetTent.com/CelinaTent.com/GetTent.co.uk © 2018 Celina Tent Inc.
-
Page 12: Product Warranty
PRODUCT WARRANTY Celina Tent Inc. warrants that this product will be free from defects in material and workmanship for a period of one (1) year following the date of purchase. Defects are limited to any defect which is a result of the manufac- turing process. - Page 13 Celina, Ohio 45822-9210 USA Telephone: 419-586-3610 YouTube: http://www.youtube.com/user/celinatent Fax: Facebook: http://www.facebook.com/celinatent 419-584-0949 Website: www.GetTent.com Google +: http://goo.gl/qvVdv Email: support@celinatent.com Twitter: http://twitter.com/celinatent LinkedIn: http://www.linkedin.com/company/celina-tent-fabric-structures 20’ x 40’ Pinnacle Series High Peak Frame Tent/Cross Cable Marquee GetTent.com/CelinaTent.com/GetTent.co.uk © 2018 Celina Tent Inc. PG.13...