Subscribe to Our Youtube Channel
Related Manuals for Celina 30’ x 45’ ETS FRAME TENT
Summary of Contents for Celina 30’ x 45’ ETS FRAME TENT
- Page 1 30’ x 45’ ETS FRAME TENT INSTRUCTIONS www.GetTent.com/instructions.htm Page 1 of 4...
- Page 2 30’ x 45’ ETS FRAME TENT INSTRUCTIONS 1. A minimum of 6 people and 2 frame tent jacks are recommended for the proper installation of this tent. Refer to the parts list at the top of the diagram to make sure you received all parts required for proper installation of this tent. 2.
- Page 3 30’ x 45’ ETS FRAME TENT INSTRUCTIONS 11. Now the perimeter is ready for assembly. The side tee and corner fittings on the 15’ bay openings need to be connected using 14’4” red SINGLE TUBE spreaders. Slide the tube over the fitting and secure it using a ROUND pin & bail. (Make sure the flat part of the pin is up and the pin is pointed toward the ground to prevent snags during tent top installation).
- Page 4 Once at the end, take the long lace and loop it up under the last two laces and tie it back up to the 4th lace from the bottom. Tie a knot to hold it into place. If you have any questions, please contact Celina Tents support department at: support@celinatent.com...
Need help?
Do you have a question about the 30’ x 45’ ETS FRAME TENT and is the answer not in the manual?
Questions and answers