Table of Contents
Advertisement
7. On one side remove both legs with base plates from the corners, place
NOTE: Do not set frame
off to the side, and carefully set the frame down.
on sidewalls.
8. Remove the other two corner legs and base plates, place off to the side,
and carefully set the frame all the way down.
NOTE: Do not set frame on
sidewalls.
9. Gently remove the tent top from the frame.
10. Fold up the tent top along with the floor and place them into the storage
bag (see Repackaging Procedure).
11. Separate all the legs from the base plates.
12. Disassemble all of the fittings from the poles by pushing in on the push
pins to release them and then sliding the pole off.
19
Strike Procedure
www.HGPTS.com
Advertisement
Table of Contents
