Self Test - Siemens S2588 Service Manual

14.09.99 S25-gb.fm
---------------------------------------------------------------
/DQJXDJH
)$;'DWD0RGH
&ORFN
$XWR3KRQH2II
.H\V
'LVSOD\
&DU8VH
+HDGVHW$QVZHU
6WDWXV
---------------------------------------------------------------
Language
You can select your language for the
display texts. 'Automatic' will set the
language normally used by your
'home' Operator.
If set in a language you cannot under-
stand, you can escape as follows:


This will set language of 'home'
Operator.
FAX/Data Mode
Please see page 48 for details of set-
ting up and using Data and Fax. You
will need to switch on IrDA below, the
other options may not be required.
IrDA
(On/Off)
Switch on to enable your IrDA (Infra-
red) to transmit data.
?
Indicates IrDA in standby.

Self Test

Your display will show connection sta-
tus.
Send Sp/FAX
Use for special service enabling a voice
call to be subsequently changed to
Fax.
S25, A31008-H3100-A1-3-7619
englisch,
Setup
Receive Sp/FAX
If your Fax/Data number is the same as
your phone number, you will need to
set this when you are expecting a Fax/
Data call.
Clock
You will initially need to set the correct
time.
Set Time&Date
Time and Date are displayed with a
flashing cursor. Replace current set-
tings as required.
&KDQJH

2.
,
Please note, if your battery is
removed for more than a few minutes
you may need to reset clock
Format Date
Set date order as required.
Auto Display
Your time display appears when you
have set it, but you may prefer to
switch it off.
Press.
Enter the date first (day/
month/year), then the time
(24 hours incl. seconds.
(On/Off)
45