Table of Contents
Advertisement
10. You then remove the ringer from the lower RF-screen.
11. Remove the clip from the lower RF-screen.
12. Remove the operating module and the radio and control
module simultaneously from the upper housing section.
Warning!
The two modules are connected by means of a flexible cable.
Be careful not to damage it during handling.
13. Then carefully remove the retaining clips of the plug-in connector on the operating
module and pull the connector cable out.
14. If necessary, also remove the retaining clip of the connector
on the radio and control module and pull the flexible cable
out.
Service Manual S25 / S2588
Sm_S25_lvl2_v11
Information and Communication Products
V 1.0
Page 11 of 35
Mobile Phones
ICP CD ST
R. Fleuren
06/99
Advertisement
Table of Contents
