Table of Contents
Advertisement
6.2
Language Groups
For S25/S2588 the following languages will be available. They will be separated into different
language groups.
Arabian
Cestina
Danish
English2
German
Italian
Portu
Swedish
Attention:
This information is subject to change! Contact your service coordinator for the latest update
and ordering numbers.
6.3
Customer Specific Initialisations
After the actual software was booted into the telephone, the customer specific
initialisations have to be programmed by the LSO.
Attention:
It has to be made shure by the LSO, that after repair the customer gets the mobile
back with the same model specific initialisation activated as they were valid before
repair was started.
Because Siemens Germany normally is shipping swap boards which are carriing
standard values only, besides booting the appropriate language group the customer
specific initialisations have to be activated by the LSO.
To perform this task a special software tool is available which is protected by a
dongle. Besides this additional dongle the same hardware as for software update can
be used.
If you have further questions regarding this tool, please refer to the Service
Information dated 30th of April, 1999 or contact the technical support team or your
Siemens service manager.
Service Manual S25 / S2588
Sm_S25_lvl2_v11
Information and Communication Products
Bulgar
Chinese3
Dutch
Finnish
Greek
Norweg
Russian
Taiwan
V 1.0
Page 24 of 35
Mobile Phones
Catalan
Czech
English
French
Hungar
Polish
Spanish
Turkish
ICP CD ST
R. Fleuren
06/99
Advertisement
Table of Contents
