Belt Replacement - Kärcher BRC 46/38 C Operating Instructions Manual

!
WARNING:
ONLY QUALIFIED MAINTENANCE PERSONNEL ARE TO PERFO THE FOLLOWING REPAIRS.

BELT REPLACEMENT

1. Turn off all switches and unplug machine.
2. Remove recovery tank and brush.
3. Remove the (2) screws that fasten the solution tank to the
frame, and tilt tank back to expose the inside of the frame.
4. Loosen the (4) screws that hold the brush motor in place
and slide motor forward to release tension in belt.
5. Remove the (2) screws that fasten the vacuum shoe links
86227350 PRV NO. 05016) to the brush housing.
6. Remove the (3) screws that fasten the side plate 86249420
(PRV NO. 62759) to the brush housing to remove belt.
NOTE: All components associated with driving the brush will
come out with the side plate.
7. Reverse process to install belt.
BRC 46/38 C 86306850 12/27/07
MAINTENANCE
86249420
PRV NO. 62759
86227350
PRV NO. 05016
4-4