Kärcher BRC 46/38 C Operating Instructions Manual page 14

OPERATIONS
Adjust handle to comfortable operating
position. Tip machine back by main handle
to move to starting point.
Lower machine to floor.
Select intermittent or continuous switch
setting to turn on brush and start solution
spray.
The intermittent setting requires the
operator to hold the switch in the "on"
position with the thumb, and is typically
used in small areas where short cleaning
passes are made.
The continuous setting allows the operator
to set the switch in the "on" position with
one touch, and is typically used in large
areas where long cleaning passes are
made.
3-7
STEP
5
STEP
6
STEP
INTERMITTENT
7
CONTINUOUS
BRC 46/38 C 86306850 12/27/07