Table of Contents
Advertisement
1. Power LED is not lit.
Check if the power cord is properly connected to the external power adapter and
the power source. Make sure the DC power jack is firmly plugged into the power
socket of the switch.
2. Link/Activity (LNK/ACT) LED is not lit when connected to devices.
- Ensure that the network device attached to the switch is switched on.
- Check the network cable; ensure it is properly connected to the switch and the
network device.
- Check the network cable; ensure the UTP cable complied with EIA/TIA 568 and
Category 5 specifications.
TROUBLESHOOTING
[!] Contact your dealer if problems persist.
Advertisement
Table of Contents
