Edimax ES-1008PH V2 Quick Installation Manual page 4

DIP Switch Definition:
The front pnael of PoE+ switch provies four pins DIP Switch. The detailed
descriptions are shown nin the following table.
DIP Switch
1
(Extend)
2
(Extend)
3
(VLAN)
4
(QoS)
Please note, after truning ON the DIP switch you will have to Reboot the
switch.
Status Description
On
This mode makes the PoE Port 1~2
operate at auto-negotiation 10Mbps
speed duplex mode only, but the
delivery distance of PoE power and
network data can reach 200m.
Off This mode makes the PoE Port 1~2
(default) operate as a genral switch.
On
This mode makes the PoE Port 3~4
operate at auto-negotiation 10Mbps
speed duplex mode only, but the
delivery distance of PoE power and
network data can reach 200m.
Off This mode makes the PoE Port 3~4
(default) operate as a genral switch.
On This mode makes the PoE+ switch
operate as a VLAN isolation switch
and port 1 to port 4 will isolate
respectively., port 1 to port 4 can only
communicate with port 5 (uplink
port).
Off This mode makes the PoE+ switch
(default) operate as a genral switch.
On
This mode makes the PoE+ switch
operate as a QOS switch, it follows the
802.1p QoS, video and voice with high
priority.
Off This mode makes the PoE+ switch
(default) operate as a genral switch.